Things to consider when opting for insulation

atticinsThere is no one word answer for material options for home insulation. The market would advise the most known material options in the insulation areas and the method for a particular site or occasion, but every project has its own circumstances to be considered while recommending for a set of options. Spray Foam Pros Attic Insulation in a facility needs to be considered taking into account an array of points. Check out thoroughly the options given to you, as the specifications and installation can have a great impact on the result.

You need to essentially know about each material and how it will work in your house construction. Environment must be given due consideration. Take a look at various types of thermal insulation materials which will help you arrive at the right decision.

Spray Polyurethane Form (SPF)

One of the best and well known options suggested and widely used in North America is SPF option. SPF is a polymer activated by heat, i.e. a foam insulation sprayed into the surface. Special equipment is used for mixing two ingredients. This is done at the site and the mixture is then sprayed through a hose supported by a heat provider onto the surface that requires insulation. There is a chemical reaction taking place between the two ingredients and the substance thus heated up by the hose will form the foam. This will expand to other areas of surface steadily and hardens eventually.

Closed Cell and Open Cell Spray Form

In SPF, there is open cell as well as closed cell option. The open cell SPF is lighter, less thick and is cheaper. The insulating power is therefore less. Closed cell SPF is thicker and expensive as compared to open cell. This option is more rigid, can support structures solidly and can prevent water vapor. This SPF is less permeable.

Closed cell SPF is very popular in United States, unlike in European countries, although it has its presence felt in Europe too. SPF is able to stop air leakages and is better than other insulation options. As it is sprayed into the object, it will clear out all the cavities and prevent possible leakages through small holes. It could be applied vertically and horizontally so that thermal insulation is provided and can prevent air seepage. Since it is synthetic, it will not attract insects and rodents. By proper application, it is very reliable and can save substantial energy.

SPF is very easy to install. Therefore, contractors prefer using the same. One has to make sure that the chemicals are evenly and thoroughly mixed in order that the foam does not peel off. Also, if the mixing is not done carefully, an odor can emanate which will be hazardous for health to the people staying inside the facility.

While installing, proper care must be taken to see that the contractor does not rush through in his work leaving gaps and holes which will reduce the efficiency of the product. Climatic conditions like temperature, humidity must be taken into account and sufficient thickness must be considered for installation. Do consult a professional or some research would be necessary to get the optimum benefit.

Comments are closed.